台电创意u盘3.0修复工具是一款台电创意u盘的量产工具,如果你的台电创意u盘出现内存不足的情况可以试试用这款软件修复,这款u盘数据还不错,能达到3.0,就是非常不稳定。如果你的u盘损坏可以来西西下载这款软件。
错误代码: 11:"Open Execute File error!"; 12:"Can't support NAND Function!"; 13:"Send Execute CMD fail!"; 14:"Check busy after Send Execute CMD!"; 15:"Can't support NFTL Function!"; 16:"Device Setup already, please erase first!"; 17:"Can't support LED Function!"; 18:"Check busy after Execute step!"; 19:"Send GetMap CMD fail!"; 20:"Return Channel not match!"; 21:"Return Bank not match!"; 22:"Return SizeofIDCode not match!"; 23:"Return Flash ID not match!"; 24:"Check busy after testGetMap Step!"; 25:"TestConfig Send IODriving_CMD fail!"; 26:"TestConfig Send SET_ECC_CMD fail!"; 27:"TestConfig Send SET_ACTiming_CMD fail!"; 28:"TestConfig Send ConfigDevice_CMD fail!"; 29:"TestConfig Send ConfigDevice_CMD fail!"; 30:"Check busy after Send ConfigDevice_CMD!"; 31:"Check busy after Test Config Step!"; 32:"TestScanINIDFT Send CMD fail!"; 33:"Check busy after TestScanINIDFT Step!"; 34:"TestReadPhysical Send CMD fail!"; 35:"TestCopy Send Init_NFTL CMD fail!"; 36:"Check busy after Initial NFTL!"; 37:"TestCopy Write fail!"; 38:"TestCopy Read fail!"; 39:"TestCopy RW Compare fail!"; 40:"Check busy after TestReadPhysical Step!"; 41:"TestErase Send CMD fail!"; 42:"Check busy after TestErase!"; 43:"Open USB FW File error!"; 44:"Open SATA FW File error!"; 45:"Send Write FW/Info CMD fail!"; 46:"Check busy after Send Write FW/Info CMD!"; 47:"Send Read FW/Info CMD fail!"; 48:"Check busy after RW Info and FW!"; 49:"Verify Info fail!"; 50:"Write Descriptor fail!"; 51:"Can't support Partition Function!"; 52:"The Supported System IDs is incomplete!"; 53:"open Image file fail!"; 54:"Set Partition Fail!"; 55:"Send Write Partition CMD fail!"; 56:"Write CD-ROM partition fail!"; 57:"Send ReadCapacity CMD fail!"; 58:"Send Init_NFTL CMD fail!"; 59:"Send Write Partition CMD fail!"; 60:"Check busy after Partition!"; 61:"Check busy after Copy Test!"; 62:"This Format type not support!"; 63:"This Windows version not support!"; 64:"Can't get Diskletter!"; 65:"Write Label name fail!"; 66:"TestFormat fail!"; 67:"Check busy after Format!"; 68:"TestExecute ReInitial-Erase fail!"; 69:"Inquiry Fail!"; 70:"Can't Initial device , now run FW!"; 71:"Check busy after Re-Initial erase Fail!"; 72:"TestExecute Stop NFTL fail!"; 73:"Send LEDC CMD fail!"; 74:"TestFormat verify BPB fail!"; 75:"Lock Disk fail!"; 76:"UnLock Disk fail!"; 77:"Get lock handle fail!"; 78:"Get Total Sectors fail!"; 79:"Open PC FW File error!"; 80:"TestReadPhysical bad block over default setting!"; 81:"TestReadPhysical Info-Block is bad!"; 82:"Execute File not found!"; 83:"TestReadPhysical Total size not enough!"; 84:"TestReadPhysical Get total block too much!"; 85:"TestFormat Create MBR error!"; 86:"TestFormat Verify MBR fail!"; 87:"Read Capacity fail!"; 88:"Enable Optitmize for Performance fail!"; 89:"Relink drive fail!"; 90:"Disk size small than Media Partition!"; 91:"Disk size small than Force capacity!"; 92:"Can't support TEPF Function!"; 93:"Refresh device fail!"; 94:"Send Terminate CMD fail!"; 95:"Check Unit Ready Timeout!"; 96:"Innostor unlock CMD fail!"; 97:"Innostor lock CMD fail!"; 98:"Get Serial number fail!"; 99:"Can't find good block to write FW!"; 100:"Can't find good block to write Info!"; 101:"TestConfig CT value error!"; 102:"Hidden size incorrect!"; 103:"Preload File Fail!"; 104:"Can not find default Stor-String!"; 105:"Write Info-Table fail!"; 106:"Get Parameter fail!"; 107:"Get Flash vendor fail!"; 108:"Get Driving setting fail!"; 109:"Can not Get File system!"; 110:"Check Innostor device fail!"; 111:"Check Preload files fail!"; 112:"Cluster size not match!"; 113:"Serial number over setting!"; 114:"Not support ISF!"; 115:"Set Permissions fail!"; 116:"Can not support this version OS!"; 117:"Not support this controller!"; 118:"Support ISF Only!"; 119:"Bad Block too much!"; 120:"Serial number length not match!"; 121:"Set parameter fail!"; 122: "Device size over range!"; 300:"SORTING_INVALID_HANDLE!"; 301:"SORTING_SUCCESS!"; 302:"SORTING_EVENT_FUNCTION_FAIL!"; 303:"SORTING_STATUS_FUNCTION_FAIL!"; 304:"SORTING_SET_PARAMETER_FAIL!"; 305:"SORTING_GET_PARAMETER_FAIL!"; 306:"SORTING_SET_PATTERN_FAIL!"; 307:"SORTING_SET_TABLE_FAIL!"; 308:"SORTING_ERASE_FAIL!"; 309:"SORTING_WRITE_FAIL!"; 310:"SORTING_READ_COMPARE_FAIL!"; 311:"SORTING_GET_RESULT_FAIL!"; 312:"SORTING_NOT_TLC_FALSH!"; 313:"SORTING_FLASH_POWER_ONOFF_FAIL!"; 314:"SORTING_SET_FEATURE_FAIL!"; 315:"SORTING_SET_BMT_FAIL!"; 316:"SORTING_BAD_BLOCKS_TOO_MUCH!"; 317:"SORTING_NOT_SUPPORT_MULTI_CHANNEL_MULTI_BANK!"; 318:"SORTING_SORTING_DATA_LENGTH_MISMATCH!"; 319:"SORTING_SORTING_SET_ALPHA_TABLE_FAIL!"; 320:"SORTING_VERIFY_IDBT_FAIL!"; 321:"SORTING_QUICK_PARAMETER_FAIL!"; 322:"SORTING_SORTING_INVLIAD_SORTING_LEVEL!";
|