The design of system on programmable chip is a new and vital aspect for the research of embedded system designing.

可编程片上系统的设计是一个崭新的富有生机的嵌入式系统设计研究方向。

It puts forward the design flow and design issue of embedded systems based on system-on-a-programmable chip (SOPC).

提出基于可编程片上系统(SOPC)的嵌入式系统设计流程及其所涉及的主要设计问题。

Integrating the data storage controll circuit into the programmable chip facilitates function extension and upgrade.

将数据的存储控制电路设计在可编程芯片中，便于今后功能的扩展、升级。

SOPC (system on a Programmable Chip) and embedded system is the most popular conception in the electronic design field.

SOPC片上可编程系统和嵌入式系统是当前电子设计领域中最热门的概念。

How to use modern DSP technology and advanced EDA software to design a System On Programmable Chip (SOPC) is discussed mainly in software design.

软件方面则主要讨论了如何应用现代DSP技术和先进的EDA设计软件进行SOPC设计。

The tremendous development of semiconductor technology and electronic design automation (EDA) made the system on a programmable chip (SOPC) possible.

随着半导体技术和电子设计自动化（EDA）的迅猛发展，使系统级可编程芯片（SOPC）成为可能。

This paper introduces a solution to satisfy the need of the hardware platform for the UAVs based on the System on a Programmable Chip (SOPC) technology.

提出了一种基于可编程片上系统(SOPC)技术的无人机飞行控制系统硬件解决方案。

Network processor (NP) is special instructions processor designed for network applications, at the same time, it is a piece of software programmable chip.

网络处理器(NP)是为网络应用领域设计的专用指令处理器，同时又是一块软件可编程的芯片。

The synchro controller utilized the programmable chip. Thus the time relationship among all signals were set up by software and generated in the mode of count.

同步控制器采用可编程器件，所有信号的时间关系均由软件设定，以计数方式产生。

As a digital programmable chip of signal conditioning chip, PGA309 is mainly used in resistance bridge pressure sensors, it amplifies and outputs the weak signal from the sensor.

PGA309作为数字化可编程信号调理芯片，主要用于电阻桥式压力传感器，将微弱的传感器桥路信号进行放大输出。

Recently, adoption of the high frequency switch mode power supply and the processing controller based on the programmable chip are the trend of the development of laser technology.

近年来出现的高频开关电源技术和以可编程芯片为核心的控制技术也逐渐在激光器设计中得到应用。

Programmable logic controller is short for PLC. It is a special purpose industry control machine, that kernel is single chip microcomputer.

可编程逻辑控制器简称为PLC，它是以单片机为核心的工业控制专用机。

These basic conceptions are necessary to implement high speed real-time processing with programmable DSP chip or special-purpose digital hardware.

所涉及的基本概念也是采用可编程DSP芯片或专用数字硬件实现高速实时处理所必需的。

A kind of reorganizable architecture for programmable encryption chip has been proposed in this paper.

提出了一种适用于可编程加密芯片的可重组体系结构。

This paper introduces an automatic programmable vacuum porcelain furnace with a single chip computer as its central part.

本文介绍了以单片机为中心构成的全自动可编程真空牙科烤瓷炉。

Combining single-chip computer and FPGA(field programmable gate grray), makes simple electric circuit, easy control strategy and high reliability.

将单片机和现场可编程逻辑器件FPGA结合运用，电路简单，控制容易，可靠性强。

This article introduced that the 8253 integrated chip of programmable counter generates kinds of waveforms for electronic stimulus needed in the physiological experiment.

介绍用可编程计数器8253集成芯片产生生理实验中所需要的各种电刺激波形。

Making use of large inner capacity and programmable resource of a CPLD chip, a high speed UART with buffer bas been designed to meet communication requirement.

利用CPLD芯片的大容量、可编程特性，设计了具有缓存功能的高速异步串行通信接口芯片，以满足日益提高的快速串行通信要求。

An error ratio testing system featured with low cost, multi-speed grades, multi-interface and a SOPC based on a single field programmable gate array (FPGA) chip were presented.

利用单片现场可编程门阵列(FPGA)可构成一个SOPC，实现了低成本、多速率、多接口的误码测试系统。

Electrically erasable programmable read-only memory (EEPROM) is mainly applied to information memory such as intelligentized IC card, single chip microcomputer, etc.

电可擦除可编程只读存储器(EEPROM)主要应用于智能IC卡，微型计算机等各种需要对信息存取的场合。