The installation of this rpm is handled by the install.sh script, which then installs MSJ.

这个 rpm 的安装是通过 install.sh 脚本进行的，然后会安装 MSJ。

The example script uses the following command to install MSJ: FAStTMSJ*_install.bin -i silent.

示例脚本使用了下面的命令安装 MSJ： FAStTMSJ*_install.bin -i silent。

Configure the paths to disk using MSJ as explained under Configuring paths to disks and load balancing.

按照配置磁盘路径和负载均衡中介绍的方法使用MS J配置磁盘路径。

The example USES the 32-bit FAStT MSJ in this installation to avoid potential problems installing the 64-bit version.

本文的示例在这次安装中使用了32位的FAStT MS j来防止在安装64位版本时可能出现的问题。

MSJ is used for configuration of the Qlogic adapters, failover, and multipathing, which is described in detail under HBA configuration.

MSJ 用于 Qlogic 适配器、故障恢复和多路径等配置，这将在 HBA 配置 一节中详细进行介绍。